Most heated apparel pages open with warmth and close with a spec table. This one works the other way: the sleeve in front of us — a graphene heated arm sleeve sold as a pull-on garment with an on-sleeve power button and a zippered power pocket — tells its story through small, deliberate engineering choices. The clearest one is printed on the detail sheet: a right-angle power plug, tucked inside the pocket so it does not snag when you bend your arm. That is a detail most listings never mention, and it is exactly the kind of detail a B2B buyer should ask about before placing an order.
The reference set shows a single black sleeve, worn from the upper arm down to the wrist, printed Upper-Arm to Wrist Coverage. It is a pull-on garment — Pull-On Sleeve Fit is printed on the artwork — with no straps, no buckles and no separate controller to clip on. The heating panel sits on the outer forearm: the artwork marks it Graphene Heating / Outer Forearm Warmth, so the warmth is positioned where you feel it when your arm hangs or holds a tool, not on the inner wrist where a watch would sit.
Two construction details are worth pausing on. First, Contoured Stitching: the panel is sewn in a curved shape that follows the forearm rather than being a rectangle glued onto flat fabric. Second, the Textured Inner Cuff — a striped weave at the opening — which reads as a grip detail rather than decoration.
A zippered pocket on the outer forearm is unusual for a sleeve, and the artwork answers why: Zippered Power Pocket. Inside it sits a cable ending in a Right-Angle Power Plug — the 90-degree bend keeps the connector flat against the pocket wall instead of poking outward. Nothing in the reference set states that a power source ships with the sleeve, and nothing prints a voltage, wattage or battery capacity. Our position is therefore simple: the pocket accepts an external power source, and which power source is included with an order is confirmed per order. Buyers who have been burned by listings that imply a bundled power bank will recognize why we leave that line blank until the order says otherwise.
The sleeve carries the word graphene in its printed title, so we write it. The heat-zone artwork shows an amber honeycomb overlay labeled Heat effect illustration — a rendering of where warmth is meant to sit, not a thermal camera capture. We do not present it as measured temperature data, and we do not attach numbers the reference set never printed. If your program needs an element-temperature spec, that is a question for the sample stage, answered against the confirmed sample rather than borrowed from another product.
The gaps matter as much as the printed claims. No temperature settings appear anywhere — no levels, no degrees, no controller readout; the on-sleeve button is shown but its mode behavior is not documented in the artwork. No fabric composition, no sizing chart, no certification marks, no cleaning instructions, and no moisture-exposure claims of any kind. None of these will be invented on our side. They are listed for the buyer as open items: confirmed per order, against the approved sample, before production.
A heated garment worn against the skin deserves the same caution we print on every wearable. Use only the power source confirmed for the order. Stop using the sleeve if the cable, plug or fabric shows damage, and never leave it charging unattended. Do not wear it against the skin at high heat settings for extended periods — take breaks and let your arm breathe. Keep it away from children, and stop immediately if the skin feels uncomfortable. This is a personal comfort garment, not a medical device, and it makes no therapeutic claim; it is not intended to diagnose, treat or prevent any disease.
For distributors, the honest pitch is structural: a pull-on sleeve with a shaped heating panel, an on-sleeve button, and a zippered pocket whose right-angle plug shows someone thought about daily wear. Custom Design / OEM / ODM Inquiries is printed on the artwork, and the configuration — fabric, panel layout, power spec, packaging — follows the approved sample before production. Talk to SHEERFOND about sample configuration and the power specification for your market.
| Item | Source |
|---|---|
| --- | --- |
| Graphene naming, Pull-On Sleeve Fit, Contoured Stitching | Printed on the artwork |
| On-Sleeve Power Button, Zippered Power Pocket | Printed on the artwork |
| Right-Angle Power Plug | Printed on the artwork |
| Upper-Arm to Wrist Coverage, Textured Inner Cuff | Printed on the artwork |
| Heat effect illustration | Printed on the artwork; reproduced as an illustration, not thermal data |
| Voltage, wattage, battery capacity, runtime, temperature settings | Not printed — confirmed per order |
| Power source inclusion, fabric composition, sizes, certifications, care | Not printed — confirmed per order |
تماس با شخص: Masum Billah
تلفن: +8616620605160
کیسه خواب پد گرمکن برقی USB گرافن برای کمپینگ سایز 195×75 سانتی متر
پد میز گرمایش برقی چرمی با دمای 45 درجه شیرفوند
آستر کیسه خواب برقی با عرض 61 سانتی متر، کیسه خواب خود گرم شونده با برق 5 ولت 2 آمپر
پد گرمایش حیوانات خانگی برقی SHEERFOND، تشک گرم کننده حیوانات خانگی برای سگ و گربه
گرم کننده نوشیدنی الکتریکی هوشمند OEM، بخاری فنجان قهوه 140-149 درجه فارنهایت
جعبه ناهار ضد آب گرم کن کیسه گرمکن آکسفورد پارچه PVC مواد نصب شده
سيستم پوشش چرخ فرمان گرم شده با گرافين با کیفیت بالا سيستم هديه گرم کننده چرخ فرمان قابل حمل
گرافین ورق گرم کننده مچ محافظ مچ محافظ دست پد گرم کننده برای دستبند